SINTER GRADE SILICON CARBIDE POWDER (SiC) TECHNICAL DATA
Panadyne offers a range of sinter grade powders to meet your specific application.
| Typical Chemical and Physical Analysis | ||||||||||||
| % Free SiO2 | % Free Si | % Free C | % Total Oxygen | S.S.A. M2/g | pH | |||||||
| FCP 10C | 0.60 | 0.05 | 0.20 | 0.20 | 10 m2/g | 6-7 | ||||||
| FCP 13 | 1.50 | 0.50 | 0.30 | 1.75 | 13 m2/g | 7-8 | ||||||
| FCP 13C | 0.70 | 0.05 | 0.15 | 0.75 | 13 m2/g | 6-7 | ||||||
| FCP 15 | 1.20 | 0.10 | 0.20 | 1.10 | 15 m2/g | 6-7 | ||||||
| FCP 15C | 0.75 | 0.05 | 0.20 | 0.85 | 15 m2/g | 6-7 | ||||||
| Analytic Procedure | ASNI B 74, 15 1986 | LECO | Bet Quantachrome | 25 Gr. SiC +50 Ml D1 H2O | ||||||||
| Typical Trace Elements | ||||||||||||||||||||
| Elements | Total Fe ppm | Total Al ppm | Total Ni ppm | Total V ppm | Total Na ppm | Total Cr ppm | Total Ca ppm | Total Ti ppm | Total Mg ppm | Total K ppm | ||||||||||
| FCP 10C | 30 | 250 | < 10 | 70 | < 100 | < 10 | 20 | 150 | < 100 | 20 | ||||||||||
| FCP 13 | 1500 | 1750 | ||||||||||||||||||
| FCP 13C | 50 | 1200 | < 10 | 60 | < 100 | < 10 | 20 | 200 | < 100 | 20 | ||||||||||
| FCP 15 | 250 | 250 | < 10 | 70 | < 100 | < 10 | 20 | 150 | < 100 | 20 | ||||||||||
| FCP 15C | 30 | 200 | < 10 | 50 | < 100 | < 10 | 20 | 75 | < 100 | 20 | ||||||||||